产品分类

产品展示

您的位置是: 首页 » 产品中心 »  其他类地板产品展示

内墙工程漆 lNTERlOR PalNT
  详细介绍

产品特点

采用进口丙烯酸类共聚物、钛白粉、助剂和水制成环保高档工程内墙哑光涂料。用于内墙和工程施工,能起到较好的装饰和保护功能。产品具有遮盖力强、白度特佳、附着力好、施工方便、干燥速度快等优点。

FEATURE

Adopt imported acrylic copolymer, titanium dioxide, assistant and water to produce interior matt paint of environmental protective high-end engineering which is used for the construction of interior woll and project with the function of good decoration and protection. The product has the characteristics of strong hidign power,excellent whiteness, good adhesion, Convenient

construction and rapid drying rate.

 

适用范围

适合工程验收内墙、普通装饰性和室内天花的涂装。在各类批灰、混凝土、砖石、石膏板腻子、抹灰层构成基面比较适合。

APPLlCATlON

Application of work for the coating of interior wall,ordinary decoration and indoor ceiling.Be suitable for the base plane composed by plaster,concrete, masonry,putty of gypsum board and plaster layer.

 

主要技术指标

最短覆涂间隔:2h   表干时间:≤1h

耐碱性:(24h)无异常   耐擦洗性:>1500次

对比率:>0.94

Main technical parameter

The shortest coting interval:2h

Surface drying time:=1h

Alkali resistance:(24h)normal

Scrubbability:>1500 times

Contrast ratio:>0.94

 

使用说明

1、基材含水率小于10%,PH值小于是10。

2、应在被涂表面及环境温度高于5℃,相对湿度低于85%的条件下施工。

3、施工方式:刷涂、轮涂、喷涂等。

4、稀释比例:视具体情况定,最多不超过30%。

5、漆量:8-10㎡/kg/遍。

lNSTRUCTION :

1、Moisture content of the substrate should be less than 10%, and the PH value should be less than 10.

2、The temperature of coated surface and environment should be above 5℃, and the relative humidity should be less than 85%.

3、Construction method:brush painting,roller painting and spray painting.

4、Dilution ratio:depending on the specific circumstance, less than 30% at most.

5、Painting volume:8-10㎡/kg/time

 

配套建议  SUGGESTlON FOR SETTlNG

底漆:通用水性白色封墙底漆1遍.    Primary coat:catkin water-based white close wall primer once

面漆:内墙面漆2遍.                   Top coat:interior top coat twice