适用范围
1、 瓷砖、乙烯基塑料板、橡胶地板、环氧地板面层的找平层。
2、 仓库地面，停车场，叉车工作区等地面硬化处理。CT-SZ40可以作为水泥基地面硬化材料，又可和环氧树脂，PVC等制作复合地板。

APPLlCATlON
1、 Tiles,vinyl plastic sheeting, rubber flooring,the leveling epoxy floor surface layer.
2、 Warehouse ground, the car park,forklifts and so on the ground work hardening.CT-SZ40 cement base can be used as
surface-hardening material, and can epoxy resin,such as PVC production parquet .

性能特点
本数据是在实验室条件下获取的,会与施工现场获得的实际数据有所差异.
FEATURE
The data obtained in laboratory conditions,and the construction site was different from actual data.

产品特点 FEATURE
1、 快速固化            1、Fast Curing
2、 施工简易            2、Construction simple
3、 体积稳定性          3、Volume stability
4、 自流平性            4、Sexual self-leveling

施工工艺
1、 材料搅拌好后，应立即用镘刀将材料推敷到上过粘接剂的干燥表面，并让其自流平，使用钉齿滚压表面以排出夹带的气泡。
2、 材料浇注后应立即进行滚压，但不要过分滚压和镘刀修整凝结的表面。
3、 所要求的施工厚度必须一次浇注完成，为了达到最好的效果，浇注和流平应以连续的过种进行。
PROCESSlNG
1、 Mixing good material, the material should be shared immediately with trowel knife to having deposited the dry adhesive surface, and allow its self-leveling, use nails to bring tooth drum roll from the bubble to the surface.
2、 Rolling immediately after casting materials, but not to roll over and finishing trowel knife condensation on the surface.
3、 The construction required by a casting thickness must
be completed in order to achieve the best results,Continuous casting and flow to the peace process.